Jerry

Jerry Slate

Appliance Repair Technician · Professional Appliance Repair

Jerry Slate is a certified appliance repair technician with Professional Appliance Repair, serving the Dallas–Fort Worth metroplex. Jerry repairs all major appliance brands and specializes in refrigerators, dishwashers, ovens, ranges, washers, and dryers — with most repairs completed same-day or next-day.

Service Area

Jerry most often serves customers in Dallas, TX, Prosper, TX, McKinney, TX, and travels throughout the DFW area.

What Customers Say About Jerry

Recent Repairs by Jerry

• Hoshizaki Ice Maker · Model C-100BAE-AD
  Dallas, TX · February 12, 2025
  “Unit compressor has burned up over heated and leaked oil inside the ice maker cavity. Due to age and wear of the unit it would be better to replace this unit over repair. This unit would need complete Rebiuld of the sealed system at minimum. Then we can test to see if there are more issues to start attempting repairs $4500.00”
• Bosch Vent Hood · Model HCP36651UC/01
  Dallas, TX · February 12, 2025
  “Customer reported that the vent keeps giving an error code stating needs new filter. But filters are clean and no clogging. I inspected the motor itself and it looks like it has grease build up in the motor this can slow down the rpm of the motor and the unit may give error thinking the unit grease filters are clogged. Unit does work and I did not see any error codes come up while I was there but we can definitely change the motor assy if customer desires but unit is functioning at this time. I will send an estimate to the customer office please follow up with the land lord and collect the service fee and if repair desired deposit.This job will require 2 men and a 6 foot ladder; ordrng 1 00795554 (Motor) and 1 00605477 (Motor capacitor) and 1 Shipping (Shipping)”
• Viking Refrigerator · Model VCBB5361RSS
  Dallas, TX · February 12, 2025
  “I did all the maintenance cleared lines re programmed the board. Exsplained to the husband there on site that the density of the unit maybe thinning over time and is no longer insulating well. That we have tried all possible suggested measures to correct the issue. Customer wants to know if we can set him up on a 6 month preventative maintenance on both units to try and stay ahead of the situation. Office please schedule 2 preventative maintenance on fridges in 6 months I will also note my personal calendar. Door is sealing all the work is now completed.”
• Miele Dishwasher · Model G 7156 SCVI
  Dallas, TX · February 12, 2025
  “The dishwasher was not installed correctly. I removed old install just installed new one and adjusted the unit to the best of my ability. The feet are stripped so I adjusted the best I could with the unit it now opens and shuts and no longer slides in. Job completed; ordrng 1 MieleIinstall-2 (Install kit)”
• Viking Refrigerator · Model VISB548DSS
  Dallas, TX · February 12, 2025
  “Unit main computer/defrost control shorted the evaporator is a solid block of ice. There is no air flow through the inside of the fridge thats why cooling has stopped. I explained to the customer that the min computer that controls the defrost along with sensors and heater need changed to correct the issue. The customer stated that they have had power outages frequently. I encouraged customer to look into a surge protection on the unit. I also told formed the customer that when the evaporator gets that thick of ice that the refrigerant inside the unit still tries to pump through the system and compressor and its recommended to replace the compressor and filter drier and blow out the rest of the sealed system with nitrogen. This is to try and get all the moisture out of the system. Also the customer bottom right hinge stop on door and hinge are broke and need replaced. I will write up an estimate and send it to the customer now. I have sent the estimate to the customer office please follow up with customer about repair. Also please note the customer has medication that needs stored in specific temperatures so please make this a priority thank youOffice please follow up with customer they want to think about it.; ordrng 1 062775-000 (Compressor) and 1 011666-000 (Inverter) and 1 Dyedrier (Dye drier) and 1 005319-000 (Main computer) and 1 Pj910031 (Heater) and 1 C8983701 (Thermistor) and 1 Pb910259 (Defrost terninator) and 1 016181-000 (Pivot plate) and 1 Pc920145 (Stop pin) and 1 Shipping (Shipping)”
• Bosch Refrigerator · Model B36IT800NP | 14
  Dallas, TX · February 12, 2025
  “"I inspected built in fridge and found that the main control board has shorted out and the fridge compressor its randomly coming on not dropping temps to set point, inverter computer is yellow from compressor heat, evaporator fans, sensors, have shorted out. You can see signs of burnt Smokey motor at door switches. While looking at fridge compressor I also checked amp reading on the freezer compressor and they are not with in manufacture specifications. This is a major repair and will require unit possibly brig pulled out, 2 men they entire day to correct the issue. I would recommend replacing main computer, 2 compressors, 2 compressor inverters, evaporator fan motors, and sensors/thermistors to correct the issue. I can try not pulling the unit out and doing the compressor replacement but it may require pulling unit out and separating lower part of the cavity. I will not know until I actually start swapping compressors this will require removing refrigerant and brazing lines loose with a torch. I am sending an estimate to the land lord and they can let us know how they would like to proceed and pay deposit.Office please call land lord to collect service fee and deposit.; ordrng 1 00146098 (Compressor) and 2 00093110 (Filter drier)s and 2 00650436 (Inverter)s and 3 10002051 (Gas valve)s and 1 00676784 (Fan motor) and 2 00617855 (Thermistor)s and 2 00617203 (Fan sensor)s and 1 00605590 (Cavity sensor) and 1 00145922 (Compressor) and 1 00676781 (Fan motor) and 1 00604180 (Sensor) and 1 11004400 (Power module) and 1 12019087 (Sub pcb) and 1 12005076 (Main control board) and 1 Shipping (Shipping)"”
• Viking Oven · Model VDOF730SS
  Dallas, TX · February 11, 2025
  “"The center radiant element is out on the broil element. Viking has a known issue for this problem. Its called run away broil element. Per Viking tech support change the main computer, the sensor, and broil element. This is a big job and will require pulling unit out and disassembly of top. This is a 2 man job. I am sending estimate to customer nowOffice please follow up with customer to collect deposit ; ordrng 1 046142-571 (Main pcb) and 1 Pe050206 (Temp sensor) and 1 057872-000 (Broil element) and 1 Shipping (Shipping)"”
• Thermador "oven, Double" · Model PRD486GDHU /20
  Dallas, TX · February 11, 2025
  “This range left side small oven has a direct short from the main computer board. There is no functions from control panel and the cooling fan is stuck running all day does not ever shut off. Also the light switch does not work. I informed the customer the 1st best approach is to replace main board/computer and go from there. That until that is fixed we would not know if any other issues are there. Customer understands. Im looking up the parts now and will send an estimate this will be a 2 man job to pull unit out.Customer has been sent estimate and will discuss it with his wife and call us back. Office please follow up with customer for parts deposit”
• Kitchenaid Refrigerator · Model KSRS25MWMS02
  Dallas, TX · February 11, 2025
  “I removed the old shorted thermostat and board then installed the new one tested unit all is now working as designed ; ordrng 1 Shipping (Shipping)”
• Kitchenaid "oven, Double" · Model KEBS278SSS04
  Dallas, TX · February 11, 2025
  “Inspected the KITCHENAID double oven and found the main pan causing the bake element to over heat and burn out. You can see the war page on the floor of the oven. Due to age its better to replace over repair”
• Kitchenaid "oven, Double" · Model KODE507EBLOO
  Dallas, TX · February 11, 2025
  “"I inspected the double oven and found that the main control board relay is sticking on bottom oven causing it to over heat. Also the top oven cooling fan repetitions are not to manufacture specs is going out. Also the top oven temperature sensor is bent down. I recommend to correct the issue on this unit to replace main computer, 2 temp sponsors the old ones are now compromised from over heat, and also the upper cooling fan. To correct the issues Office I ordered parts from reliable and rescheduled for the following week thanks; ordrng 1 W11179310 (Main computer board) and 1 W10801665 (Sub computer) and 1 W11245567 (Upper cooling motor) and 2 W10859573 (Temperature sensors)s and 1 Ship (Ship)"”
• Viking Refrigerator · Model VCSB5483SS
  Dallas, TX · February 11, 2025
  “I inspected the icemaker and the shut off arm is not staying inside the icemaker. It falls out very easy. I tried several times to put it back in but the receiver on the icemaker is not keeping it. I recommend replacement the icemaker to correct the issue. The customer asked if I could ask about any warranty because the issue started happening after the last repair we did. I told her I would ask the manager and get back to her.I discussed with Roger and he said that we would be able to replace the ice-maker no labor charge if customer pays for the part since unit is out of our warranty. Office please follow up with customer to collect deposit; ordrng 1 057731-000 (Ice maker) and 1 Shipping (Shipping)”
• Kitchenaid "oven, Double" · Model KEBC207KBLO
  Dallas, TX · February 10, 2025
  “I removed broken glass and install new now unit is working as designed”
• Kitchenaid Refrigerator · Model MODELKSSC36FKS00I
  Dallas, TX · February 10, 2025
  “I inspected the fridge and the freezer reads 70 degrees. However temperature test shows -7 degrees food. So temps are good. I have seen this several times on this model. You will need to upgrade computer board change thermistor and bimetal to correct the issue. Im sending an estimate not to the customer. Office please follow up with customer and see if they want to make deposit.”
• Thermador Freezer · Model T18IF900SP / 03
  Dallas, TX · February 10, 2025
  “"I inspected the unit and found several issues main issue is electronic control board has shorted out and no lights or display are on the control panel. The control panel will illuminate for a short period of time then go off. The compressor stays running but the unit does not cool. Also door does not seal all the way. See pics partly due to poor seal and also door hinge guide broken and missing. To correct this issue it will need a new main control board, sub control board. Also to address the compressor issue replace the compressor with filter dye dryer and check for any leaks. I explained to the customer that we have to start with the main control board 1st and if that does not complete the repair then we will need to keep going on other possible things. Customer stated if the board dont fix it he may buy a new unit."”

Showing 15 of 38 recent jobs by Jerry.

Want Jerry on your service call?
Call (214) 358-1496 and ask for Jerry when scheduling.